Typically, the temperature hot summer, "Micro Cooling Fan" of speed relative after another. In this case, the user can try auxiliary cooling system, using laptop external...
First, the choice of "220V AC Cooling Fan" must be able to provide enough exhaust volume (speed), under the high temperature of the cooling device inside the hot air; whe...
"Waterproof Cooling Fan" PWM Speed: PWM speed can be manufactured, this function automatically adjusts the DC cooling fan rotation speed, when the ambient temperature is ...
"Cooling Fan Manufacturer" is used in parallel operation of two or more fans. Two fans in parallel air flow volume of parallel operation of the fan and the fan alone gene...
The following guidelines provide a "24V DC Cooling Fan" users the best way to reduce the noise to a minimum
1. System Impedance: (SystemImpedance) a housing air inlet an...
1. "Micro Cooling Fan" FANb Although the amount of wind and static pressure are more FANa high, but customers should be based on the best choice OPa; non only fan the max...
Thermostat "220V AC Cooling Fan" principle is: According to the elevated heat around the fan to increase the speed of the fan itself, while increasing air flow (exhaust v...
There are certain physical "Waterproof Cooling Fan" knowledge knows: the same pressure and the contact surface roughness of the situation, rolling friction is less than s...
In general, "Cooling Fan Manufacturer" feature is very difficult to measure airflow, but there are still two ways method used to measure the static pressure and air volum...
Due to the high speed "24V DC Cooling Fan" have a greater noise than the low speed fan, so you should try and use low-speed fans as possible. And a large size, low speed ...