"Exhaust Fan" hot indoor air can quickly exhaust the air outside the other side of the suction chamber, the temperature and the outside temperature reaches unchanged and ...
Through-flow fan known as "Cross Flow Fan", so refer to the same thing, just a different name! This through-flow fan is a 1892 French engineer Mortes (Mortier) first prop...
"Axial Fan" fluid from the centrifugal force, so that the centrifugal force due to the increased static pressure could be zero, so it can produce much lower than the firs...
"AC Fan" centrifugal fan is the first to use it to start from the beginning. Cause sometimes fails to be started or the start time is very long question, the emergence of...
A, "Cooling Fan" season before maintenance: before using the season starts, check whether the unit inlet and surrounding obstructions.
B, use and maintenance crew: pay a...
"DC Fan" mechanical structure consists of the following major components: A. Frame: plastic repression, generally square, round. B. Blade: outside on the fan rotor, outer...
Centrifugal "Blower Fan" works with centrifugal fan is similar, except that the air compression process usually is the result of several working impeller (or several stag...
"Exhaust Fan" outwardly discharge air in the process will cause indoor air pressure drops, indoor air becomes thin, the formation of a negative pressure zone, due to the ...
1, "Cross Flow Fan" ambient temperature should be 75ºC ≥ -40ºC.
2, industrial gas through the cooling fan does not allow strong acid, alkali and various sol...
"Axial Fan" takes its name from the fluid inflow and outflow from the axial impeller in the axial direction. Its working principle is based on leaf airfoil theory: gas by...
