Tiny Cooling Fan storage and maintenance methods

Tiny Cooling Fan storage and maintenance methods

1, "Tiny Cooling Fan" fans have found abnormal sound during operation, the motor severe fever, live shell, switch trip, you can not start and so on, should immediately stop checking. To ensure safety, do not allow the fan to run in maintenance, repair should be carried out after the commissioning of five minutes or so, confirming that no anomalies start running again.
2, this can only be operated at the fan completely normal circumstances, while ensuring an adequate supply facility capacity, voltage stability, non-phase operation, the supply line must be a dedicated line, not a long-term temporary power lines.
3, "Tiny Cooling Fan" in the use of the environment should be kept clean, the fan keep the surface clean, the outlet should not have debris regularly to remove dust and other debris inside the fan and piping.
5, the cooling fan should be stored in a dry environment to avoid motor damp. When open storage cooling fan, there should be preventive measures. In the storage and handling process should prevent the cooling fan bump, so as not to damage the fan.
4, "Tiny Cooling Fan" from time to time to supplement or replace the bearing grease (sealed bearings in the motor need not be replaced during the life of grease), to ensure the cooling fan in good lubrication during operation, refueling times under ambient conditions based less than 1000 hours / times closed bearings and motor bearings, fuel use zl-3 lithium base grease to fill a third of the bearing inner and outer rings, running short of oil is strictly prohibited.